Product Info

    Leading Energy Saving Company

 
Power Drain Trap(pneumatic)
  • Float type(WRDT-500)
  • Float High Pressure(WRDT-500HS)
  • Float+Ball valve(WRDT-1000,2000)
  • Power Drain Trap(Electric)
  • Timer type(WRET-08,15)
  • Timer+Ball valve(WRMT-SERIES)
  • Sensor+Motorized valve(WRET-1500,3000)
  • High capacity(WRET-5000)
  • Reciprocating compressor(WRCT-08)
  • Reciprocating compressor(WRCT-08)
  • Attachable Valve Strainer(WRST-SERIES)
  • Attachable Valve Strainer(WRST-SERIES)
  • EXHAUST MUFFLER(ALWITCO, USA)
  • EXHAUST MUFFLER(ALWITCO, USA)
  • DEWPOINT METER(Shawmeters.UK)
  • DEWPOINT METER(Shawmeters.UK)
  • Air Filter Element(WRE-SERIES)
  • Air Filter Element(WRE-SERIES)

  • Reciprocating compressor(WRCT-08)

      Advantages

      ◎ Exclusive reciprocating compressor
      ◎ The installable small size in the bottom of R-tank.
      ◎ Working by compressor loading and unloading
      ◎ Free installation regardless of direction.
      ◎ Manual drain discharge is available
      ◎ The optional valve sticked strainer

      Specification

      SPECIFICATION
      MODELIN/OUT SIZEOPTIONUsing PressureUsing Temp.Compressor
      WRCT-081/4"-0 ~ 9.9 kgf/㎠

      		2 ~ 75 ℃

      		3 ~ 20HP
      WRCT-08-I1/4", 1/2"I-STRAINER
      WRCT-08-Y1/2"Y-STRAINER

      Auto drain Working Status

      The 1st press.(R/Tank)The 2nd press.(Head)Compressor Working StatusDrain Status
      0.2~2.0 kgf/㎠0.2~2.0 kgf/㎠Same pressure (In the case of compressor working)OPEN
      2.0 kgf/㎠이상2.0 kgf/㎠이상Same pressure (After pressure rising)CLOSE
      5.0 kgf/㎠이상2.0~4.0 kgf/㎠In the case of Compressor running- Loading/UnloadingOPEN

      * The 1st press. : Inside pressure of air receiver tank (Inlet pressure of trap)
      * The 2nd press. : Pressure between compressor head & check valve (Balance line pressure of trap)

      DIMENSION

      INSTALLATION

      1. Stop air compressor and install.

      2. The 1st piping of trap: Connect to the drain of receiver tank

      3. The 2nd piping of trap: Connect to the using air vent line

      (Solenoid valve or pressure switch)

      4. Check how it works after installation (Refer to the previous page Auto drain Working Status )